We clean driveways, sidewalks, patios, and hard surfaces in Benson without damaging them.
Not every surface wants the same pressure. In Benson we read the surface first, then pick the method that lifts the buildup without etching or streaking. That is the difference between clean and damaged.
Every surface on a property has a limit. A brick walkway will not take what a poured pad will. We start by reading the material, then set the pressure and the cleaner to match it. You get the buildup gone and the surface still whole.
Most of what darkens a slab is alive. Algae and mildew root into the pores and hold water there. Through a Benson summer that spreads, and a surface that stays damp is a surface that has started breaking down. Cleaning it is maintenance, not decoration.
You do not have to have all of these. Any single one is enough reason to have someone look at it.
Flat work gets a surface cleaner, not a spray tip, so the pass rate is even and the finish has no stripes.
Concrete only looks right when it dries evenly. We move your date rather than rush a job in the wet.
We adjust for concrete, brick, or pavers so nothing gets etched.
Most Benson driveways and walkways are done in a single visit.
We clear the slick algae that makes walkways dangerous when wet.
We check the material and the worst spots before we start.
We apply the right cleaner to break down algae and grime.
We wash at a pressure the surface can take, edge to edge.
We rinse it down and walk it with you.
Concrete is the forgiving one. It is the only exterior surface around Benson you can clean in almost any month of the year, which means it is usually the job people put off longest and then need most.
| Surface | How often | When, and why then |
|---|---|---|
| Driveways, walkways, patios | Once a year | Year round. It dries fast in summer and works fine in winter above freezing |
| Siding | Once a year | Late April to May, or October. After the pine pollen drops, or after the leaves are down |
| Sealed concrete | Reseal every two to three years | Late spring or fall, when days and nights both stay above about 50 degrees |
We price the surface, not the hour, so a slow job is our problem and not your invoice. Square footage sets the floor. Heavy algae, rust, or a long hose pull from the nearest tap is what moves it up.
These are ballparks for Benson-area homes, not a price list. The right-hand column is the part that actually decides your number, which is why we quote the job before we start it.
| Job | Typical range | What moves it |
|---|---|---|
| Driveway and walkway | $150 – $400 | Square footage, rust or oil staining, years of growth |
| Drive and patio together | $300 – $650 | Total flatwork area, whether sealing follows |
| House wash, single story | $300 – $550 | Elevation footage, access, how long since the last wash |
| House wash, two story | $450 – $850 | Reach, steep ground, planting tight to the walls |
We have been cleaning Benson, where I-95 and I-40 come together, since 2010. It is in Johnston County and it is on our regular run.
Recurring beats reactive on a commercial property, and it costs less per visit. We set an interval that suits your traffic, keep a dated record of every visit, and stay out of the way of your customers while we do it. Fully insured, HUB-certified, invoiced on terms.
“One of the most professional and organized companies I have worked with. Driveway looks incredible.”
“Long driveway with years of clay stains. It came out even end to end with no stripes anywhere.”
“Did a great job on our pavers and driveway. Got out sap and pollen I did not think would ever come up.”
We fly the roofline and show you the footage on the spot. You see your own gutters, joints, and downspouts on the screen instead of taking our word for it. It costs nothing and you are not committing to the cleaning.
Free for homes and businesses across the Triangle and Johnston County. No obligation to book any work afterwards.
Call (919) 698-3669 or send a few details. A real person answers.
Get My Free Quote → 📞 (919) 698-3669