We clean driveways, sidewalks, patios, and hard surfaces in Angier without damaging them.
Every surface on a property has a limit. A brick walkway will not take what a poured pad will. We start by reading the material, then set the pressure and the cleaner to match it. You get the buildup gone and the surface still whole.
Not every surface wants the same pressure. In Angier we read the surface first, then pick the method that lifts the buildup without etching or streaking. That is the difference between clean and damaged.
Concrete in Angier takes a beating. Pollen in spring, algae in the shade, red clay after every storm. We match the pressure and cleaner to the surface so it comes clean and stays intact.
Most people call us when they notice the third one on this list. The first one is when it is easiest to deal with.
Most Angier driveways and walkways are done in a single visit.
We control where the rinse goes so it does not flood your beds or your neighbor.
Concrete only looks right when it dries evenly. We move your date rather than rush a job in the wet.
We clear the slick algae that makes walkways dangerous when wet.
You know the number in advance and it does not move.
We check the material and the worst spots before we start.
We apply the right cleaner to break down algae and grime.
We wash at a pressure the surface can take, edge to edge.
We rinse it down and walk it with you.
Concrete is the forgiving one. It is the only exterior surface around Angier you can clean in almost any month of the year, which means it is usually the job people put off longest and then need most.
| Surface | How often | When, and why then |
|---|---|---|
| Driveways, walkways, patios | Once a year | Year round. It dries fast in summer and works fine in winter above freezing |
| Siding | Once a year | Late April to May, or October. After the pine pollen drops, or after the leaves are down |
| Sealed concrete | Reseal every two to three years | Late spring or fall, when days and nights both stay above about 50 degrees |
Three things set the number: how much surface there is, how long the buildup has been sitting, and whether the truck and hose can get near it. A driveway on its own is the cheap end. Add the walkways, the patio, and the porch and it climbs.
These are ballparks for Angier-area homes, not a price list. The right-hand column is the part that actually decides your number, which is why we quote the job before we start it.
| Job | Typical range | What moves it |
|---|---|---|
| Driveway and walkway | $150 – $400 | Square footage, rust or oil staining, years of growth |
| Drive and patio together | $300 – $650 | Total flatwork area, whether sealing follows |
| House wash, single story | $300 – $550 | Elevation footage, access, how long since the last wash |
| House wash, two story | $450 – $850 | Reach, steep ground, planting tight to the walls |
Angier is southwest of us in Harnett County, and it has been on our route since 2010. We are somewhere in Harnett County most weeks of the year.
Commercial work runs on your schedule, not ours. We can clean before you open or after you close, we carry full insurance and can send a certificate to your property manager, and we are certified through the NC HUB program as a woman-owned business if that matters to your vendor list.
“Long driveway with years of clay stains. It came out even end to end with no stripes anywhere.”
“Did a great job on our pavers and driveway. Got out sap and pollen I did not think would ever come up.”
“One of the most professional and organized companies I have worked with. Driveway looks incredible.”
We fly the roofline and show you the footage on the spot. You see your own gutters, joints, and downspouts on the screen instead of taking our word for it. It costs nothing and you are not committing to the cleaning.
Free for homes and businesses across the Triangle and Johnston County. No obligation to book any work afterwards.
Call (919) 698-3669 or send a few details. A real person answers.
Get My Free Quote → 📞 (919) 698-3669