♀ Woman-OwnedServing since 20104.9 ★ · 213 reviewsLicensed & InsuredNC HUB-CertifiedA real person answers
Free drone gutter inspection No ladder on your house. No obligation.
HomeServices › Deck & Fence
Woman-Owned · Insured

Deck & Fence Cleaning across the Triangle and Johnston County

We clean Triangle-area decks and fences with low pressure so the wood comes clean, not chewed up.

♀ Woman-Owned★ 4.9 · 213 reviewsLicensed & InsuredSince 2010

Wood and high pressure do not mix. Too much force splinters boards and leaves marks. We use a gentle wash that lifts the gray and mildew off your Triangle-area deck and gets it ready for stain.

A tired gray deck usually just needs the right clean, not a rebuild. Our low-pressure wash pulls the mildew and weathering off Triangle-area decks and fences and brings the wood color back.

Gray boards are not rotten boards. That gray is a thin layer of dead fiber and mildew sitting on top of good wood. Take it off gently and the color underneath is still there.

If a stain is going on next, the wash decides how it turns out. Stain will not bond through mildew or a weathered gray layer, and it will lift early wherever it tried. We take the wood back to clean and let it dry, so whatever goes on top actually holds.

The underside of the rail and the face of the risers are where a deck actually looks dirty from. People clean the floor because that is what they stand on, and then wonder why it still reads gray from the yard.

Composite is not maintenance free, it is stain free. It still grows the same mildew film in the same shaded corners, and it still needs washing. The difference is it takes the cleaning easily and never needs a finish on top.

Deck and fence cleaning in the Triangle and Johnston County is a low-pressure job, and that surprises people who have seen the results of a high-pressure one. Wood is soft. Too much pressure raises the grain, furs the surface, and leaves marks that no amount of staining hides.

Cleaning and staining are two different jobs on two different days, and the gap between them matters. Wood has to dry properly before anything goes on it. Staining damp wood is the single most common reason a finish fails within a year.

Composite decking has its own rules. It does not need much pressure at all and the mould that grows in the grain responds to treatment rather than force.

What we clear
gray weatheringmildewalgaedirtpollen
Surfaces
wood deckscompositevinyl fencewood fencepergolasrailings
Composite deck with railings and patio furniture after a low-pressure cleaning
Composite deck, cleaned
Do you need it yet

Signs it is time

Any one of these means the buildup has already started working on the surface. The longer it sits, the harder it is to lift.

  • Boards gone flat gray instead of wood-toned
  • Black speckling in the shaded sections
  • Fence panels with a green film at the base
  • Stain that will not soak in evenly anymore
  • A deck that feels slick underfoot after rain
  • The rail tops looking fine and the risers looking green
  • Grey, flattened color where the wood used to be warm
  • Green film in the shaded sections and under the rail
  • Black spotting in the grain that a brush does not shift
  • A surface that is slick underfoot after rain
  • Fencing that has gone dark along the bottom third
  • Old stain flaking rather than fading evenly

Get a free quote →

What you get

Why property owners call us

No splinters or marks

Low pressure cleans the wood without tearing the grain.

Ready for stain

A clean, dry deck is the right base for sealing or staining.

Brings back the color

We clear the gray film hiding the real wood tone.

Fences too

We clean vinyl and wood fencing on the same visit.

We work with the grain

Every pass follows the board so the finish stays even.

Railings included

Rails, posts, and lattice get cleaned, not just the floor.

Fasteners and soft spots noted

If a board is going or a screw has lifted, you hear about it while it is still one board.

Safe footing again

The film that makes a shaded deck slippery in the wet is the first thing off.

Low pressure on wood

Enough to clean, not enough to raise the grain or fur the surface.

Treated for mould, not just rinsed

The black spotting in the grain is organic. It needs chemistry.

Composite handled differently

Lower pressure again and a treatment suited to the material.

Dried properly before any finish

If staining follows, we let the wood dry to the right moisture first.

Process

How our Deck & Fence Cleaning works

1

Check the wood

We look for soft spots and set the pressure low.

2

Apply cleaner

A gentle solution breaks down mildew and gray.

3

Soft rinse

We rinse with the grain for an even finish.

4

Ready to seal

We let you know when it is dry enough to stain.

Pricing

What deck & fence cleaning costs

Deck and fence cleaning in the Triangle and Johnston County prices off square footage and linear feet. Wood takes longer than composite because it needs a lighter touch. Railings and lattice add time to the job.

Get an exact price →

What moves the number
  • Deck square footage
  • Fence linear feet
  • Wood versus composite or vinyl
  • Railings, lattice, and detail work
  • How weathered the boards have gotten
  • One side of the fence or both
  • Deck square footage
  • Linear feet and height of fencing
  • Railings, balusters, and lattice
  • Wood or composite
  • Old finish that needs stripping
  • Whether staining follows the clean
Recent work

Jobs we have finished

Wood privacy fence running along a lawn after cleaning
Wood privacy fence
Brick paver patio being surface cleaned, clean pavers emerging beside dirty ones
Paver patio, surface cleaning
White vinyl siding and brick foundation after a soft wash by Clayton Pressure Washing
House wash, vinyl siding
Green algae staining running down the vinyl siding and gable of a ranch home before a soft wash
Algae streaks, before the soft wash
Concrete walkway with one half pressure washed clean and the other still stained
Walkway, half cleaned
Stamped concrete patio with a wet-look finish after cleaning and sealing
Stamped concrete, sealed
Questions

Deck & Fence Cleaning, answered

Should I pressure wash my Triangle-area deck before staining?
Clean it, yes, but with a soft wash, not high pressure. We prep Triangle-area decks so stain goes on evenly and lasts.
Will cleaning damage older wood?
Not with our low-pressure method. We set the pressure to the board condition so old wood stays intact.
Do you stain or seal too?
We clean and prep. Once it is dry we can talk about sealing to protect the finish.
How long before I can stain?
Give it two to three dry days. We check the forecast with you before we schedule.
Can you clean a covered porch?
Yes. Covered areas usually collect more cobwebs and dust than growth, and they clean up quickly.
Does composite decking need cleaning?
Yes. It will not rot or splinter, but it grows the same mildew film in the shade. It cleans easily and does not need anything put on it afterwards.
Will you get the green off the bottom of my fence?
That band at the base is where the mulch and the sprinkler keep it damp. It comes off. It also comes back faster than the rest, so that is the section worth doing yearly.
Do you do deck cleaning in the Triangle and Johnston County and the surrounding towns?
Yes, including Raleigh, Garner, and the rest of the area we cover. Decks, fencing, pergolas, and railings.
Do you stain decks as well as clean them?
We clean and prepare, and staining is a separate visit once the wood has dried properly. Staining damp wood is why finishes peel within a year, so we will not do both in one day.
How long should a deck dry before staining?
Usually two to three days of dry weather here, longer in humid stretches or if the deck is shaded. We check rather than guess, because the surface can feel dry while the wood underneath is not.
Will pressure washing damage my deck?
It can, easily. Wood is soft and high pressure raises the grain and leaves permanent marks. We work at low pressure and let the cleaning solution do the work, which takes longer and does not wreck the boards.
Can you clean composite decking?
Yes, and it needs a different approach again. Very low pressure and a treatment for the mould that grows in the grain. Composite does not need stripping or staining, but it does go green in the shade like everything else here.
Can you get grey wood back to its original color?
Usually a long way toward it. Greying is surface oxidation of the wood fibre and cleaning lifts most of it. How close it gets depends on the wood and how long it has been left.
Why us

Woman-owned since 2010

We protect what we are not cleaning

Plants get watered down before and rinsed after. Fixtures, lights, and outlets get covered. Nothing gets sacrificed to save time.

100% satisfaction guarantee

If it is not right, we come back. No argument and no invoice games.

Licensed, insured, HUB-certified

Full coverage on every job, plus NC HUB certification that helps on supplier-diversity contracts.

One number for the whole property

Roof, siding, concrete, glass, gutters, and the inside of a commercial building. You are not managing four vendors and four schedules.

We show up on the day we said

If the weather moves us, you hear it from us that morning, not after you have waited all afternoon.

The right method, not the strongest

Soft wash where soft wash belongs. Pressure only where the surface can take it. That is how nothing gets damaged.

Our guarantee

If something is not right, we come back and make it right. That is the whole policy.

By town

Deck & Fence in your town

By industry

Deck & Fence for your business

Guides

Reading before you book

Free, no obligation

Free gutter inspection, flown by drone

We fly the roofline and show you the footage on the spot. You see your own gutters, joints, and downspouts on the screen instead of taking our word for it. It costs nothing and you are not committing to the cleaning.

Free for homes and businesses across the Triangle and Johnston County. No obligation to book any work afterwards.

Free Deck & Fence Cleaning quote

Call (919) 698-3669 or send a few details.

Get My Free Quote → 📞 (919) 698-3669
📞 Call Clayton Pressure Washing · A real person answers