We clean driveways, sidewalks, patios, and hard surfaces in Apex without damaging them.
Concrete in Apex takes a beating. Pollen in spring, algae in the shade, red clay after every storm. We match the pressure and cleaner to the surface so it comes clean and stays intact.
Not every surface wants the same pressure. In Apex we read the surface first, then pick the method that lifts the buildup without etching or streaking. That is the difference between clean and damaged.
Every surface on a property has a limit. A brick walkway will not take what a poured pad will. We start by reading the material, then set the pressure and the cleaner to match it. You get the buildup gone and the surface still whole.
You do not have to have all of these. Any single one is enough reason to have someone look at it.
You get a real person on the phone and full coverage on the work.
We control where the rinse goes so it does not flood your beds or your neighbor.
You know the number in advance and it does not move.
Flat work gets a surface cleaner, not a spray tip, so the pass rate is even and the finish has no stripes.
Concrete only looks right when it dries evenly. We move your date rather than rush a job in the wet.
We check the material and the worst spots before we start.
We apply the right cleaner to break down algae and grime.
We wash at a pressure the surface can take, edge to edge.
We rinse it down and walk it with you.
Concrete is the forgiving one. It is the only exterior surface around Apex you can clean in almost any month of the year, which means it is usually the job people put off longest and then need most.
| Surface | How often | When, and why then |
|---|---|---|
| Driveways, walkways, patios | Once a year | Year round. It dries fast in summer and works fine in winter above freezing |
| Siding | Once a year | Late April to May, or October. After the pine pollen drops, or after the leaves are down |
| Sealed concrete | Reseal every two to three years | Late spring or fall, when days and nights both stay above about 50 degrees |
Pressure washing in Apex prices off square footage, how heavy the buildup is, and how easy the area is to reach. A standard driveway sits at the low end. A whole property with walkways, patio, and porch runs higher.
These are ballparks for Apex-area homes, not a price list. The right-hand column is the part that actually decides your number, which is why we quote the job before we start it.
| Job | Typical range | What moves it |
|---|---|---|
| Driveway and walkway | $150 – $400 | Square footage, rust or oil staining, years of growth |
| Drive and patio together | $300 – $650 | Total flatwork area, whether sealing follows |
| House wash, single story | $300 – $550 | Elevation footage, access, how long since the last wash |
| House wash, two story | $450 – $850 | Reach, steep ground, planting tight to the walls |
Apex has been on our list since 2010. It is just west of Cary, it sits in Wake County, and we know which streets green up first.
Nothing we do should happen in front of your customers. We scope the job around your open hours, we are fully insured and can send proof straight to your property manager, and our HUB certification is on file with the state if procurement asks.
“Did a great job on our pavers and driveway. Got out sap and pollen I did not think would ever come up.”
“Long driveway with years of clay stains. It came out even end to end with no stripes anywhere.”
“One of the most professional and organized companies I have worked with. Driveway looks incredible.”
We fly the roofline and show you the footage on the spot. You see your own gutters, joints, and downspouts on the screen instead of taking our word for it. It costs nothing and you are not committing to the cleaning.
Free for homes and businesses across the Triangle and Johnston County. No obligation to book any work afterwards.
Call (919) 698-3669 or send a few details. A real person answers.
Get My Free Quote → 📞 (919) 698-3669