We clean driveways, sidewalks, patios, and hard surfaces in Cleveland without damaging them.
Every surface on a property has a limit. A brick walkway will not take what a poured pad will. We start by reading the material, then set the pressure and the cleaner to match it. You get the buildup gone and the surface still whole.
Not every surface wants the same pressure. In Cleveland we read the surface first, then pick the method that lifts the buildup without etching or streaking. That is the difference between clean and damaged.
Concrete in Cleveland takes a beating. Pollen in spring, algae in the shade, red clay after every storm. We match the pressure and cleaner to the surface so it comes clean and stays intact.
One of these is worth a look. Two or more and the surface has been going this way for a while.
We clear the slick algae that makes walkways dangerous when wet.
You know the number in advance and it does not move.
We adjust for concrete, brick, or pavers so nothing gets etched.
You get a real person on the phone and full coverage on the work.
Flat work gets a surface cleaner, not a spray tip, so the pass rate is even and the finish has no stripes.
We check the material and the worst spots before we start.
We apply the right cleaner to break down algae and grime.
We wash at a pressure the surface can take, edge to edge.
We rinse it down and walk it with you.
Concrete is the forgiving one. It is the only exterior surface around Cleveland you can clean in almost any month of the year, which means it is usually the job people put off longest and then need most.
| Surface | How often | When, and why then |
|---|---|---|
| Driveways, walkways, patios | Once a year | Year round. It dries fast in summer and works fine in winter above freezing |
| Siding | Once a year | Late April to May, or October. After the pine pollen drops, or after the leaves are down |
| Sealed concrete | Reseal every two to three years | Late spring or fall, when days and nights both stay above about 50 degrees |
Pressure washing in Cleveland prices off square footage, how heavy the buildup is, and how easy the area is to reach. A standard driveway sits at the low end. A whole property with walkways, patio, and porch runs higher.
These are ballparks for Cleveland-area homes, not a price list. The right-hand column is the part that actually decides your number, which is why we quote the job before we start it.
| Job | Typical range | What moves it |
|---|---|---|
| Driveway and walkway | $150 – $400 | Square footage, rust or oil staining, years of growth |
| Drive and patio together | $300 – $650 | Total flatwork area, whether sealing follows |
| House wash, single story | $300 – $550 | Elevation footage, access, how long since the last wash |
| House wash, two story | $450 – $850 | Reach, steep ground, planting tight to the walls |
Cleveland is out Highway 42 in western Johnston County, and it has been on our route since 2010. We are somewhere in Johnston County most weeks of the year.
Recurring beats reactive on a commercial property, and it costs less per visit. We set an interval that suits your traffic, keep a dated record of every visit, and stay out of the way of your customers while we do it. Fully insured, HUB-certified, invoiced on terms.
“Long driveway with years of clay stains. It came out even end to end with no stripes anywhere.”
“One of the most professional and organized companies I have worked with. Driveway looks incredible.”
“Did a great job on our pavers and driveway. Got out sap and pollen I did not think would ever come up.”
We fly the roofline and show you the footage on the spot. You see your own gutters, joints, and downspouts on the screen instead of taking our word for it. It costs nothing and you are not committing to the cleaning.
Free for homes and businesses across the Triangle and Johnston County. No obligation to book any work afterwards.
Call (919) 698-3669 or send a few details. A real person answers.
Get My Free Quote → 📞 (919) 698-3669