We clean driveways, sidewalks, patios, and hard surfaces in Clayton without damaging them.
Not every surface wants the same pressure. In Clayton we read the surface first, then pick the method that lifts the buildup without etching or streaking. That is the difference between clean and damaged.
Every surface on a property has a limit. A brick walkway will not take what a poured pad will. We start by reading the material, then set the pressure and the cleaner to match it. You get the buildup gone and the surface still whole.
Most of what darkens a slab is alive. Algae and mildew root into the pores and hold water there. Through a Clayton summer that spreads, and a surface that stays damp is a surface that has started breaking down. Cleaning it is maintenance, not decoration.
None of these fix themselves. What is growing there feeds on moisture, and every season it holds more of it.
You know the number in advance and it does not move.
Flat work gets a surface cleaner, not a spray tip, so the pass rate is even and the finish has no stripes.
Concrete only looks right when it dries evenly. We move your date rather than rush a job in the wet.
We adjust for concrete, brick, or pavers so nothing gets etched.
Most Clayton driveways and walkways are done in a single visit.
We check the material and the worst spots before we start.
We apply the right cleaner to break down algae and grime.
We wash at a pressure the surface can take, edge to edge.
We rinse it down and walk it with you.
Concrete is the forgiving one. It is the only exterior surface around Clayton you can clean in almost any month of the year, which means it is usually the job people put off longest and then need most.
| Surface | How often | When, and why then |
|---|---|---|
| Driveways, walkways, patios | Once a year | Year round. It dries fast in summer and works fine in winter above freezing |
| Siding | Once a year | Late April to May, or October. After the pine pollen drops, or after the leaves are down |
| Sealed concrete | Reseal every two to three years | Late spring or fall, when days and nights both stay above about 50 degrees |
Pressure washing in Clayton prices off square footage, how heavy the buildup is, and how easy the area is to reach. A standard driveway sits at the low end. A whole property with walkways, patio, and porch runs higher.
These are ballparks for Clayton-area homes, not a price list. The right-hand column is the part that actually decides your number, which is why we quote the job before we start it.
| Job | Typical range | What moves it |
|---|---|---|
| Driveway and walkway | $150 – $400 | Square footage, rust or oil staining, years of growth |
| Drive and patio together | $300 – $650 | Total flatwork area, whether sealing follows |
| House wash, single story | $300 – $550 | Elevation footage, access, how long since the last wash |
| House wash, two story | $450 – $850 | Reach, steep ground, planting tight to the walls |
Since 2010 we have worked Clayton, our home base. If you are in Johnston County, one of our trucks is probably nearer than you think.
The commercial version of this job is mostly logistics. We walk the property, agree what gets cleaned and when, and work it around your open hours. Insurance documentation and the HUB certification go out with the proposal so nobody has to ask twice.
“Long driveway with years of clay stains. It came out even end to end with no stripes anywhere.”
“One of the most professional and organized companies I have worked with. Driveway looks incredible.”
“Did a great job on our pavers and driveway. Got out sap and pollen I did not think would ever come up.”
We fly the roofline and show you the footage on the spot. You see your own gutters, joints, and downspouts on the screen instead of taking our word for it. It costs nothing and you are not committing to the cleaning.
Free for homes and businesses across the Triangle and Johnston County. No obligation to book any work afterwards.
Call (919) 698-3669 or send a few details. A real person answers.
Get My Free Quote → 📞 (919) 698-3669